Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Lighting Systems) >> Repair Instructions >> Headlamp Leveling Sensor Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Disconnect the electrical connector (1).
    4. Fig 1: View Of Front Headlamp Leveling Sensor Electrical Connector
    GM802719Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the ball and socket (1) from vehicle.
  5. Remove the bolt (2) from the sensor.
    6. Fig 2: View Of Ball & Socket
    GM802716Courtesy of GENERAL MOTORS CORP.
  6. Remove the sensor from the vehicle.
scientia non olet · About Mike's Workshop Manuals