Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Entertainment System) >> Repair Instructions >> Receiver Replacement - Digital Radio >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the receiver electrical connectors.
    2. Fig 1: View Of Digital Radio Receiver Electrical Connectors
    GM1211148Courtesy of GENERAL MOTORS CORP.
  2. Locate the receiver to the vehicle.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the fasteners securing the receiver to the vehicle.

    Tighten:  Tighten the fasteners to 9 N.m (80 lb in).

    4. Fig 2: View Of Digital Radio Receiver
    GM1210910Courtesy of GENERAL MOTORS CORP.
  4. Install the right body side trim. Refer to Trim Panel Replacement - Body Side Rear in Interior Trim.
  5. Perform the setup procedure for the digital radio receiver. Refer toDigital Radio Receiver Setup .
scientia non olet · About Mike's Workshop Manuals