Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Entertainment System) >> Repair Instructions >> Amplifier Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the body side trim panel. Refer to HVAC Module Replacement - Auxiliary in Heating, Ventilation and Air Conditioning.
  2. Remove the fasteners securing the HVAC module.
  3. Slide the HVAC module over to gain access to the amplifier.

    Do not remove the HVAC module.

  4. Remove the fasteners securing the amplifier bracket to the vehicle.
  5. Fig 1: View Of Amplifier Bracket
    GM1211151Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connectors (1).
  7. Fig 2: View Of Amplifier Electrical Connectors
    GM1211147Courtesy of GENERAL MOTORS CORP.
  8. Remove the amplifier from the bracket.
  9. Fig 3: View Of Amplifier
    GM1211150Courtesy of GENERAL MOTORS CORP.