Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Stationary Window System) >> Repair Instructions >> Window Replacement - Liftgate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
  2. Reconnect the rear window defogger connector.
  3. Install the wiper motor. Refer to Wiper Motor Replacement - Liftgate in Wipers/Washer Systems.
  4. Install the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate in Interior Trim.
  5. Close the liftgate.
  6. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About Mike's Workshop Manuals