Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Stationary Window System) >> Repair Instructions >> Quarter Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Bodyside Stationary Windows .
  2. Connect the antenna lead located on the rear quarter window.
  3. Connect the OnStar® connector located on the rear quarter window.
  4. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  5. Test the radio and the OnStar® system to verify reception.
  6. Close the liftgate.
scientia non olet · About Mike's Workshop Manuals