Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2006 >> STS V >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 3.6L - DTC P0342 To P0690) >> DTC P0455 >> Repair Verification

Repair Verification

WARNING: This page is about a different variant/trim than selected.
  1. Lower the EVAP purge canister to gain access to the EVAP vent inlet, and seal it, using a suitable plug or a plug from the J 41413-300  . See Special Tools .
  2. Turn the nitrogen/smoke valve to nitrogen.
  3. Use the remote switch to activate the J 41413-200  . See Special Tools .
  4. Use the remote switch to introduce nitrogen and fill the EVAP system until the floating indicator stabilizes.
  5. Verify the flow meter's stable floating indicator position is at or below the red flag.
  6. Clear the DTCs with a scan tool.
scientia non olet · About Mike's Workshop Manuals