Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2006 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Antilock Brake System With Traction Control System) >> Repair Instructions >> Traction Control Switch Replacement (Stabilitrak) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
  2. Gently lift the retaining tabs (2) and remove the Stabilitrak switch (3) from the I/P assembly (1).
    Fig 1: Removing Stabilitrak Switch
    GM786376Courtesy of GENERAL MOTORS CORP.
    3. Fig 2: Disconnecting Stabilitrak Switch Harness Connector
    GM788223Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the harness connector from the Stabilitrak switch.
scientia non olet · About Mike's Workshop Manuals