Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2006 >> DTS 4.6 9 >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> DTC C0292 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the yaw rate sensor/lateral accelerometer and the steering wheel position sensor connectors.
  2. Ignition ON, measure for 4.8-5.2 volts at each 5-volt reference circuits and ground.
    • If over 5.2 volts, test each 5-volt reference circuit for a short to voltage. If the circuits tests normal, replace the EBCM.
    • If under 4.8 volts, test each 5-volt reference circuit for short to ground. If the circuits tests normal, replace the EBCM.