Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2006 >> CTS V >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Theft Deterrent System) >> Repair Instructions >> Theft Deterrent Inclination Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right side body side panel trim. Refer to Body Side Rear Trim Panel Replacement (w/o TB5) or Body Side Rear Trim Panel Replacement (w/TB5) .
    Fig 1: View Of Theft Deterrent Alarm And Inclination Sensor
    GM1283464Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector on the inclination sensor (1).
  3. Remove the inclination sensor from the bracket.
scientia non olet · About Mike's Workshop Manuals