Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2005 >> Escalade EXT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.8L, 5.3L & 6.0L - Introduction >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement (2500 Series) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Pressure Sensor
    GM1312086Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the seal on the fuel pressure sensor.
  2. Press the fuel pressure sensor (1) into the line.
  3. Install the intermediate fuel and EVAP lines. Refer to Fuel Hose/Pipes Assembly Replacement (2500 Series - Front Tank)  or Fuel Hose/Pipes Assembly Replacement (2500 Series - Intermediate)  or Fuel Hose/Pipes Assembly Replacement (1500 Series - 5.3L (L59) Engine)  or Fuel Hose/Pipes Assembly Replacement (1500 Series) .
scientia non olet · About Mike's Workshop Manuals