Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2005 >> Escalade EXT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.8L, 5.3L & 6.0L - Introduction >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement (2500 Series - Front Tank) >> Removal Procedure

Removal Procedure

IMPORTANT: Clean the fuel feed pipe connections and surrounding areas prior to disconnecting the fittings in order to avoid possible fuel system contamination.
    Fig 1: View Of Fuel Feed Line & Rear Fuel Feed Line
    GM1312082Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Single Tank)  or Fuel Tank Replacement (Dual Tanks - Front)  or Fuel Tank Replacement (Dual Tanks - Rear)  or Fuel Tank Replacement (Single Tank w/5.3L (L59) Engine) .
  2. Disconnect and remove the fuel feed line (4) from the module and retaining clips. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  3. Disconnect and remove the rear fuel feed line (2) from the module and retaining clips. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  4. Cap the fuel feed and evaporative emission (EVAP) openings in order to prevent possible fuel/EVAP system contamination.
scientia non olet · About Mike's Workshop Manuals