Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Engine Controls - 2.8L - Introduction) >> Repair Instructions >> Fuel System Cleaning >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the fuel system as follows:

  1. Install the fuel injectors and fuel rail. Refer to Fuel Injectors and Fuel Rail Replacement .
  2. Install the fuel module assemblies. Refer to Fuel Tank Module Replacement - Primary  andFuel Tank Module Replacement - Secondary .
  3. Install the fuel filter. Refer to Fuel Filter Replacement .
  4. Refer to Quick Connect Fitting(s) Service (Plastic Collar)  in order to connect the following quick connect fittings to the fuel rail:
    • The feed hose/pipe
    • The return hose/pipe
scientia non olet · About Mike's Workshop Manuals