Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Wiper System And Washer System) >> Repair Instructions >> Wiper Motor Module Replacement (LHD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Air Inlet Panel-To-Cowl Panel Screws (LHD)
    GM776821Courtesy of GENERAL MOTORS CORP.
  1. Remove the wiper motor mini 10 A and 30 A fuses. The wiper motor fuses are located in the underhood fuse block.
  2. Remove the wiper arm assemblies. Refer to Wiper Arm Replacement (LHD)  or Wiper Arm Replacement (RHD) .
  3. Remove the air inlet grille (1,3). Refer to Air Inlet Grille Panel Replacement (LHD) or Air Inlet Grille Panel Replacement (RHD) in Body Front End.
    4. Fig 2: Wiper Transmission View
    GM776830Courtesy of GENERAL MOTORS CORP.
  4. Remove the wiper motor module mounting bolts (3,5).
  5. Disconnect the wiper motor electrical connector (4).
  6. Remove the wiper motor module (1) from the vehicle.
scientia non olet · About Mike's Workshop Manuals