Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical-4.6L.
    3. Fig 1: Expanded View Of Starter Motor BAT Terminal Wire
    GM104910Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the BAT cable from the starter.
  4. Disconnect the wire from the "S" terminal on the starter.
    5. Fig 2: View Of Starter Motor - LH2
    GM54606Courtesy of GENERAL MOTORS CORP.
  5. Remove the 2 starter motor mounting bolts.
  6. Remove the starter motor.
scientia non olet · About Mike's Workshop Manuals