Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Introduction >> Repair Instructions >> Seat Back Frame Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Back To Recliner Fasteners
    GM547146Courtesy of GENERAL MOTORS CORP.
  1. Slide the seat back frame down into the recliner and align the fasteners holes.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 4 seat back frame fasteners.

    Tighten:  Tighten the fasteners to 30 N.m (22 lb. ft.).

  3. Install the heated and cooled seat module to the seat back frame. Refer to Module Replacement - Ventilation Heat and Cool - Seat Back .
  4. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
    5. Fig 2: View Of Seat Back Frame Electrical Connectors
    GM295159Courtesy of GENERAL MOTORS CORP.
  5. Route and connect the electrical connectors to the seat back.
  6. Install the front seat. Refer to Seat Replacement - Bucket .
scientia non olet · About Mike's Workshop Manuals