Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - 5.7L - Introduction) >> Repair Instructions >> Air Cleaner Element Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Loosening Air Cleaner Outlet Duct Clamps
    GM1385108Courtesy of GENERAL MOTORS CORP.
  1. Loosen the screw clamps (1,2) and remove the air cleaner outlet duct from the vehicle. Refer to Air Cleaner Outlet Duct Replacement .
    2. Fig 2: View Of Air Cleaner Housing Cover Screws
    GM1455160Courtesy of GENERAL MOTORS CORP.
  2. Remove the air cleaner housing cover screws (1).
    3. Fig 3: View Of Air Cleaner Element
    GM1385111Courtesy of GENERAL MOTORS CORP.
  3. Remove the air cleaner element.
  4. Remove any loose debris that may be found laying in the base of the air cleaner housing.
scientia non olet · About Mike's Workshop Manuals