Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - 5.7L - Introduction) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Loosening Air Cleaner Outlet Duct Clamps
    GM1385108Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 5.7L.
  2. Loosen the clamps (1,2) and remove the air cleaner outlet duct from the vehicle. Refer to Air Cleaner Outlet Duct Replacement .
    3. Fig 2: View Of Screws Securing Air Cleaner Assembly
    GM1385110Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws (1) securing the air cleaner assembly to the vehicle and remove the assembly.
scientia non olet · About Mike's Workshop Manuals