Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.8L - Introduction >> Repair Instructions >> Ignition Coil(s) Replacement - Bank 2 >> Installation Procedure

Installation Procedure

    Fig 1: Ignition Coil View
    GM860797Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition coil(s).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the ignition coil bolt(s).

    Tighten:  Tighten the ignition coil bolt(s) to 10 N.m (89 lb in).

    3. Fig 2: View Of Ignition Coil Electrical Connectors
    GM887888Courtesy of GENERAL MOTORS CORP.
  3. Install the ignition coil electrical connector(s).
  4. If necessary, install the upper intake manifold. Refer to Intake Manifold Replacement - Upper in Engine Mechanical - 2.8L (LP1).
scientia non olet · About Mike's Workshop Manuals