Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2004 >> XLR >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Turn the ignition switch to the OFF position.
    2. Fig 1: View Of Brake Fluid Pressure Sensor Connector & Nuts
    GM1274762Courtesy of GENERAL MOTORS CORP.
  2. Loosen the two insulator nuts located on each side of the EBCM.
  3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    4. Fig 2: View Of EBCM Connector, Bracket & Bolts
    GM1274761Courtesy of GENERAL MOTORS CORP.
  4. Remove the two bracket bolts.
  5. Remove the brake pressure modulator valve (BPMV) bracket.
scientia non olet · About Mike's Workshop Manuals