Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Antilock Brake System, Traction Control System & Stability Control System) >> Repair Instructions >> Wheel Speed Sensor Ring Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wheel Speed Sensor & Connector
    GM631238Courtesy of GENERAL MOTORS CORP.
  1. Remove the wheel speed sensor (2). Refer to Wheel Bearing/Hub Replacement - Rear (FE1, FE3) or Wheel Bearing/Hub Replacement - Rear (FE7) in Rear Suspension.
    2. Fig 2: View Of Wheel Speed Sensor Reluctor
    GM631451Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not reuse the wheel speed sensor reluctor after it has been removed.
  2. Remove and discard the wheel speed sensor reluctor (1).
scientia non olet · About Mike's Workshop Manuals