Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2004 >> SRX 3.6 7, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Power Door Lock Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the inside handle bezel from the inner door panel in the following order:
    1. Hold the inside handle (1) to the open position.
    2. Insert a flat-bladed tool at the front lower corner of the bezel.
    3. Pry outward on the bezel.
    4. Remove the bezel from the inner door panel.
    2. Fig 1: View Of Inside Handle
    GM786527Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the lock switch.
scientia non olet · About Mike's Workshop Manuals