Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2004 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Switch Replacement - Door Lock and Side Window - Driver >> Removal Procedure

Removal Procedure

  1. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (With YE9 Early Production)  or Trim Panel Replacement - Side Front Door (With YE9 Late Production) .
  2. Disconnect the electrical connectors.
  3. Remove the screw that retains the switch panel bezel (1) from the front door panel.
    4. Fig 1: Removing Screw Retaining Switch Panel Bezel (Driver Door)
    GM833288Courtesy of GENERAL MOTORS CORP.
  4. Remove the switch panel bezel from the door panel using a flat-bladed tool.
    5. Fig 2: Removing Switch Panel Bezel (Driver Door)
    GM811888Courtesy of GENERAL MOTORS CORP.
  5. Using a wide plastic flat-bladed tool, release the retaining clips on both sides of the door module.
  6. Remove the door module from the switch panel bezel.
    7. Fig 3: Removing Door Module From Switch Panel Bezel (Driver Door)
    GM833442Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals