Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2004 >> DeVille Protection Series >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - 4T80-E (Introduction, Service & Replacement) >> Repair Instructions >> Torque Converter Cover Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: View Of Engine-To-Transmission Brace & Attaching Bolts
    GM627396Courtesy of GENERAL MOTORS CORP.
  1. Install the torque converter cover.

    Tighten:  Tighten the cover bolt to 12 N.m (106 lb in).

  2. Install the engine-to-transmission brace and attaching bolts.

    Tighten:  Tighten the bolts to 47 N.m (35 lb ft).

  3. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals