Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2004 >> DeVille Protection Series >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Back Frame Replacement - Front >> Installation Procedure

Installation Procedure

  1. Slide the seat back frame down into the recliner and align the fasteners holes.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 4 seat back frame fasteners.

    Tighten:  Tighten the fasteners to 30 N.m (22 lb ft).

    3. Fig 1: View Of Seat Back Frame Fasteners
    GM547146Courtesy of GENERAL MOTORS CORP.
  3. Install the heated and cooled seat module to the seat back frame. Refer to Module Replacement - Ventilation Heat and Cool - Seat Back .
  4. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
  5. Route and connect the electrical connectors to the seat back.
    6. Fig 2: View Of Seat Back Frame Electrical Connectors
    GM295159Courtesy of GENERAL MOTORS CORP.
  6. Install the front seat. Refer to Seat Replacement - Bucket .
scientia non olet · About Mike's Workshop Manuals