Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.6L - Introduction >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Intake >> Installation Procedure

Installation Procedure

    Fig 1: Installing CMP Sensor
    GM1285251Courtesy of GENERAL MOTORS CORP.
  1. Install the CMP sensor.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the CMP sensor bolt.

    Tighten:  Tighten the CMP sensor bolt to 10 N.m (89 lb in).

    3. Fig 2: Installing CMP Sensor Electrical Connector
    GM1285245Courtesy of GENERAL MOTORS CORP.
  3. Install the CMP sensor electrical connector.
scientia non olet · About Mike's Workshop Manuals