Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.6L & 3.2L - Introduction >> Repair Instructions >> Intake Resonance Switchover Solenoid Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Intake Resonance Switchover Solenoid
    GM819412Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the following from the intake resonance switchover solenoid:
    • The electrical connector
      • IMPORTANT: Observe the proper positions of the vacuum hoses.
    • The vacuum hoses
  2. Remove the intake resonance switchover solenoid screws.
  3. Remove the intake resonance switchover solenoid from the intake air resonator.
scientia non olet · About Mike's Workshop Manuals