Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2003 >> Seville SLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Side Impact Module Wiring Harness Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Inflatable Restraint Side Impact Inflator Module & Wiring Harness
    GM513378Courtesy of GENERAL MOTORS CORP.
  1. Install new side inflator module wiring harness (3) to seat frame.
  2. Install the wiring harness clips to retain the side inflator module wiring harness (3) to seat frame.
  3. Install the inflatable restraint side impact inflator module (2) to seat (1). Refer to Inflatable Restraint Side Impact Module Replacement - Front .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7  or SIR Disabling and Enabling Zone 9 .
scientia non olet · About Mike's Workshop Manuals