Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 650 (HVAC Systems - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Connecting Inside Air Temperature Assembly Electrical Connector
    GM760802Courtesy of GENERAL MOTORS CORP.
  1. Connect the inside air temperature assembly electrical connector (1).
  2. Connect the inside air temperature assembly tube (3).
  3. Confirm that the foam seal tape is in place and covering the openings on the sides of the grille assembly (2).
  4. Press the inside air temperature assembly (2) into the I/P.
scientia non olet · About Mike's Workshop Manuals