Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 619 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Bracket Replacement (LS6) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Generator Bracket To Engine & Mounting Bolts
    GM1455612Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the generator. Refer to Generator Replacement (LA3, LY9)  or Generator Replacement (LS6)  or Generator Replacement (LY7) .
  3. Remove the accessory drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement - Accessory in Engine Mechanical - 5.7L.
  4. Remove the generator bracket bolts.
  5. Remove the generator bracket from the engine.
scientia non olet · About Mike's Workshop Manuals