Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 459 (Antilock Brake System, Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> DTC C0558: Calibration Data Not Programmed >> Conditions for clearing the DTC

Conditions for clearing the DTC

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The DTC clears when software programming is complete.

DTC C0558

Step Action Yes No
1 Did you perform the ABS Diagnostic System Check? Go to Step 2  Go to Diagnostic System Check - ABS (W/O JL4)  or Diagnostic System Check - ABS (W/JL4) 
2 Perform the set-up procedure for the EBCM. Refer to Service Programming System (SPS) in Programming.
Did you complete the action?		 Go to Diagnostic System Check - ABS (W/O JL4)  or Diagnostic System Check - ABS (W/JL4)  -
scientia non olet · About Mike's Workshop Manuals