Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Trim Panel Replacement - Front Seat >> Installation Procedure

Installation Procedure

  1. Position the trim panel on the seat from the front to the back.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Instal the trim panel (1) to the seat by pushing in until the retaining clips are locked in place.
  3. Install the screws retaining the seat back release handle and the seat recliner handle to the seat, if, removed.

    Tighten 

    1. Tighten the screws to 2 N.m (18 lb in).
    Fig 1: Installing Screws Retaining Seat Back Release Handle
    G01459220Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals