Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2003 >> CTS Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle Servicing) >> Removal & Installation >> Pressure Control Solenoid >> Installation

Pressure Control Solenoid: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install new "O" ring seals (3-4) to the pressure control solenoid (1), if the "O" rings were previously removed. See Figure.
  2. Install the pressure control solenoid (1) into the control valve body.
  3. Install the pressure control solenoid retainer into the control valve body. See Figure.
  4. Connect the electrical wiring harness connector (2) to the pressure control solenoid (1). See Figure.
  5. Install the transmission oil pan and filter.
scientia non olet · About Mike's Workshop Manuals