Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Module Replacement - Rear Power Window (Tahoe/Yukon/Escalade) >> Removal Procedure

Removal Procedure

  1. Raise and support the window glass.
  2. Remove the trim panel. Refer to Trim Panel Replacement - Side Rear Door (Tahoe/Yukon/Escalade)  or Trim Panel Replacement - Side Rear Door (Suburban/Yukon XL/Avalanche/Escld EXT) .
  3. Remove the water deflector. Refer to Water Deflector Replacement - Rear Door (Tahoe/Yukon/Escalade)  or Water Deflector Replacement - Rear Door (Suburban/Yukon XL/Avalanche/Escld EXT) .
  4. Disconnect the window motor electrical connector.
  5. Loosen the two window clamp bolts on the regulator.
  6. Remove the bolts retaining the window regulator to the door.
    7. Fig 1: Rear Power Window Module (Tahoe/Yukon/Escalade)
    GM581720Courtesy of GENERAL MOTORS CORP.
  7. Remove the module from the door.
scientia non olet · About Mike's Workshop Manuals