Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2001 >> DeVille Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Removal & Installation >> Heated Seat Module >> Installation (Front)

Installation (Front)

  1. Install heated seat module (1) to module bracket and install heated seat module fasteners. See Fig 1 .
  2. Install module and bracket assembly (3) to seat riser, with electrical connections towards rear of vehicle.
  3. Connect electrical connections to module or modules (1, 2).
  4. Align fastener holes on seat adjuster with fastener holes on seat bracket (3).
  5. Bend tabs on seat module bracket (3) to hold bracket and module assembly (3) in place on seat riser.
  6. Install front seat cushion.
Fig 1: Identifying Under Seat Components
G00073569Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals