Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2000 >> Escalade >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Supplemental Inflatable Restraint System) >> Diagnostic Tests >> DTC B1026: Driver Deployment Loop Open >> Conditions For Setting DTC

Conditions For Setting DTC

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1999 GMC Yukon, 1999 GMC Suburban, 1999 GMC Sierra, 1999 GMC Pickup, and 1999 GMC Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

DTC sets when voltage difference between DRIVER HIGH terminal No. 2 and DRIVER LOW terminal No. 3 is greater than or equal to 400 millivolts for 500 milliseconds during DEPLOYMENT LOOP CONTINUITY, RESISTANCE MEASUREMENT, or CONTINUOUS MONITORING tests.

scientia non olet · About Mike's Workshop Manuals