Cruise Control Functional Switches

Functional control switches are located on the end of the multifunction lever, which also serves as a turn signal lever. Functional control switches include a SET/COAST button and a sliding main switch with OFF, ON and R/A positions.

• OFF
  
  System disengages when switch is turned to OFF position.
• ON
  
  System is ready to be set when switch is turned to ON position.
• SET/COAST
  
  Spring-loaded SET/COAST button engages cruise. During engagement, if SET/COAST button is pressed and held, vehicle decelerates (cruise disengages) until button is released. When button is released, cruise engages and maintains new set speed. By quickly pressing and releasing (tapping) SET/COAST button, the set speed is "tapped" down in one MPH increments.
• R/A (Resume/Accelerate)
  
  Spring-loaded R/A switch will not initially set cruise speed, but when cruise has been disengaged by braking, momentarily sliding this switch to R/A position will cause cruise to resume previously set speed. This is the resume function. Accelerate function occurs when R/A switch is held in position for more than one second. This causes the vehicle to accelerate until switch is released. When released, system maintains new set speed. By quickly pressing and releasing (tapping) R/A switch, the set speed is "tapped" up in one MPH increments.