Removal & Installation (Without UE1)

WARNING: This page is about a different car, the 2000 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

Remove rear compartment trim panel. See REAR COMPARTMENT TRIM PANEL . Remove bay board fasteners and pull bay board away from body. See Fig 2 . Place bay board module side up in rear compartment. Disconnect electrical connection from cellular telephone module. Remove fasteners retaining module to bay board and remove cellular telephone module. To install, reverse removal procedure.

Fig 1: Removing Cellular Telephone Module (With UE1)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing Rear Bay Board (Without UE1)

Courtesy of GENERAL MOTORS CORP.