Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 1999 >> Seville STS >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Remove/Install/Overhaul 4.6L) >> Fuel System >> Fuel Pressure Regulator >> Installation

Fuel Pressure Regulator: Installation

WARNING: This page is about a different car, the 1998 Cadillac Seville, 1998 Cadillac Eldorado, and 1998 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. DO NOT reuse "O" rings. Lubricate NEW fuel inlet "O" ring with oil and install in regulator. Replace filter screen as necessary. Tighten intake manifold cover nuts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About Mike's Workshop Manuals