Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 1999 >> Seville SLS >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Diagnostic Tests >> DTC U1064: Loss Of Communications With Dim >> Testing

DTC U1064: Loss Of Communications With Dim: Testing

  1. If data link communications diagnostic system check has been performed, go to next step. If data link communications diagnostic system check has not been performed, perform data link communications diagnostic system check. See DATA LINK COMMUNICATIONS DIAGNOSTIC SYSTEM CHECK  under SYSTEM TESTS.
  2. Using scan tool, attempt to establish communications with DIM. If scan tool communicates with DIM, go to next step. If scan tool does not communicate with DIM, perform BODY CONTROL SYSTEM DIAGNOSTIC CHECK  under SYSTEM TESTS.
  3. Check and repair class 2 serial data line circuit No. 1807 (Purple wire) for intermittent conditions. See appropriate wiring diagram in DATA LINK CONNECTORS article in WIRING DIAGRAMS. After repairs, go to next step.
  4. Turn ignition switch to OFF position. Reconnect components and connectors. Turn ignition switch to ON position. Using scan tool, clear DTCs. After clearing DTCs, perform DATA LINK COMMUNICATIONS DIAGNOSTIC SYSTEM CHECK  under SYSTEM TESTS.
scientia non olet · About Mike's Workshop Manuals