Security Indicator Light On At All Times
WARNING: This page is about a different car, the 1997 Cadillac Catera. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect Brown, 32-pin BCM connector C2. See Figure . Turn ignition switch to ON position. If security indicator light is illuminated, repair short to chassis ground in Brown/Blue wire between BCM connector C2, terminal C06 and gauge cluster connector terminal No. 23 and go to SYSTEM CHECK. If light is not illuminated, go to next step.
- Check all power and ground circuits to BCM. If circuits are good, replace BCM and go to SYSTEM CHECK.