Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 1997 >> Seville SLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Body Control Module) >> Diagnosis & Testing >> DTC U1300: Class-II Bus Shorted To Ground >> Diagnostic Procedures

Diagnostic Procedures

WARNING: This page is about a different car, the 1998 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform BCM diagnostic system check. See BCM DIAGNOSTIC SYSTEM CHECK  . After performing system check, go to next step.
  2. Check and repair Class-II serial data line circuit No. 1807 (Purple wire) for intermittent conditions. See WIRING DIAGRAMS  . After repairs, go to next step. If circuit is okay, replace module. After replacing module, go to next step.
  3. Turn ignition off. Reconnect components and connectors. Turn ignition on. Clear DTCs using scan tool. After clearing DTCs, recheck system operation.
scientia non olet · About Mike's Workshop Manuals