Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 1997 >> Seville SLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Keyless Entry System - Remote) >> Removal & Installation >> Remote Function Actuator (RFA) Receiver Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1998 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

Remove rear compartment sill plate. Remove spare tire cover and spare tire. Remove convenience net retainers and rear edge of rear compartment. Remove rear compartment front trim panel. Push on retainer at rear edge of bracket and slide toward driver side. Disconnect electrical connector. Remove RKE module from bracket. To install, reverse removal procedure.

scientia non olet · About Mike's Workshop Manuals