Fuel Injector(s)

WARNING: This page is about a different car, the 1995 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect fuel injector harness connector. Measure resistance across injector terminals at each injector. Resistance should be as specified. See INJECTOR RESISTANCE SPECIFICATIONS .

INJECTOR RESISTANCE SPECIFICATIONS ⁽¹⁾

Application

Ohms

Aurora

⁽²⁾

⁽¹⁾	Injector resistance specification is at 140°F (60°C).

⁽²⁾	Information not available from manufacturer.

NOTE: If injectors are dirty, they should be cleaned using approved injector cleaning procedure before performing INJECTOR BALANCE TEST.