Failure Conditions

Failure conditions for PCM code set change depending on whether code was previously set or not.

Code P099 not previously set:

• Cruise control disengaged for 2 seconds.
• Throttle angle greater than 20 degrees, TP sensor not failed.
• MAP greater than 70 kPa, TP sensor failed.
• Cruise control servo stroke greater than 63 percent for 0.1 second.

Code P099 previously set:

• Cruise control disengaged for 2 seconds.
• Throttle angle greater than 16 degrees, TP sensor not failed.
• MAP greater than 55 kPa, TP sensor failed.
• Cruise control servo stroke greater than 38 percent for 0.1 second.