Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 1991 >> Seville Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System/Washer System >> Testing >> Washer Will Not Operate Test >> Corvette

Washer Will Not Operate Test: Corvette

  1. Disconnect washer pump connector. Turn ignition switch to RUN or ACCESSORY position. Connect test light between terminals "A" and "B" of washer pump connector. Activate washer switch while observing test light. If test light comes on, replace washer pump. If test light stays off, connect test light between terminal "A" and ground. Activate washer switch.
  2. If test light comes on, repair open ground circuit No. 150 (Black wire), terminal "B" of pump connector. If test light stays off, disconnect wiper motor module connectors C1 and C2. Connect test light between C1 terminal "C" and ground. Activate washer switch. If test light comes on, repair open circuit No. 94 (Pink wire).
  3. If test light stays off, connect test light between C1 terminal "A" and ground. Activate washer switch. If test light stays off, check for open circuit No. 96 (Brown wire). If circuit is okay, replace wiper/washer switch. If test light comes on, connect test light between C2 terminal "B" and ground.
  4. Activate washer switch. If test light comes on, repair or replace wiper motor module. If test light stays off, check for open circuit No. 97 (Light Blue wire). If circuit is okay, replace wiper/washer switch.
scientia non olet · About Mike's Workshop Manuals