Floor Shift Models

With gear selector lever in the "P" position and ignition key in "LOCK" position, gear selector lever should not be able to be moved to other gear positions. Ignition key should be removable from column.
With key in "RUN" position and gear selector lever in the "N" position, ensure key cannot be turned to "LOCK" position. If system does not perform as described in steps 1) and 2), go to step 3) for adjustment procedure.
If key cannot be removed in Park, snap connector lock button to up position. Move cable connector nose rearward until key can be removed from ignition. See Fig 1 or Fig 2 . Snap lock button down.

Fig 1: Park/Lock Control Cable On "J" Bodies
Courtesy of GENERAL MOTORS CORP.

Fig 2: Park/Lock Control Cable On "W" Bodies
Courtesy of GENERAL MOTORS CORP.