Chart A-1: Ignition Enable CKT

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1988 Cadillac Fleetwood, 1988 Cadillac DeVille, 1987 Cadillac Fleetwood, 1987 Cadillac DeVille, and 1986 Cadillac Fleetwood. However, it is still accessible from the selected car via links, so may be relevant.

Ignition enable circuit engergizes ECBM to perform self- diagnosis and initialize system. Battery voltage is supplied through 5-amp brake fuse to ECB M pin No. 2. Ground circuit is at ABS ground junction, locted on left fender rail, at EC

Fig 1: Chart A-1 Ignition Enable Circuit