Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2024 >> Envision Preferred >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance Systems - Repair Instructions >> Repair Instructions >> Active Safety Control Module Replacement >> Installation Procedure

Installation Procedure

  1. GM6408561Courtesy of GENERAL MOTORS COMPANY

    Active Safety Control Module (1) @ Active Safety Control Module Bracket (2) - Install

  2. GM6408560Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Install the active safety control module and bracket assembly (2) to the vehicle.

  3. Active Safety Control Module Bracket Nut (1) - Install and tighten [2x] 9 N.m (80 lb in)
  4. Connect the electrical connectors.
  5. Quarter Lower Rear Trim Panel - Install - Quarter Lower Rear Trim Panel Replacement