Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All Fasteners Listed In This Table Can Be Reused After Removal. |
|
| Battery Hold Down Bolt-Lower | 22 N.M (16 Lb Ft) |
| Battery Hold Down Bolt-Upper | 9 N.M (80 Lb In) |
| Battery Hold Down Nut | 9 N.M (80 Lb In) |
| Battery Negative Cable Ground Nut | 22 N.M (16 Lb Ft) |
| Battery Negative Cable Ground Stud | 22 N.M (16 Lb Ft) |
| Battery Negative Cable Nut | 9 N.M (80 Lb In) |
| Battery Negative Post Clamp Nut | 4.5 N.M (40 Lb In) |
| Battery Positive Cable Nut@Engine Wiring Harness Junction Block | 15 N.M (11 Lb Ft) |
| Battery Positive Cable Nut@Generator | 15 N.M (11 Lb Ft) |
| Battery Positive Cable Nut@Power Distribution Fuse Block | 15 N.M (11 Lb Ft) |
| Battery Positive Cable Nut@Starter Solenoid | 13 N.M (115 Lb In) |
| Engine Wiring Harness Fuse Block Bracket Bolt | 9 N.M (80 Lb In) |
| Engine Wiring Harness Junction Block Bolt | 9 N.M (80 Lb In) |
| Generator And Starter Cable Bracket Bolt | 9 N.M (80 Lb In) |
| Generator Bolt | 22 N.M (16 Lb Ft) |
| Multifunction Power Supply Converter Bracket Bolt | 2.5 N.M (22 Lb In) |
| Starter Bolt | 58 N.M (43 Lb Ft) |
| Water Pump Stud | 9 N.M (80 Lb In) |