Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2024 >> Enclave Premium, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.6L (LFY) - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Protector Replacement >> Installation Procedure

Installation Procedure

  1. GM6179180Courtesy of GENERAL MOTORS COMPANY

    Fuel Feed Pipe Protector(2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Fuel Feed Hose Protector Nut(1) - Install and tighten [2x]22 N.m (16 lb ft)
  3. Remove the support and lower the vehicle.
scientia non olet · About Mike's Workshop Manuals